Having overcome all the various treatments described above, we distinguish below the various types of plates:
1. Standard White Slab: sandwich composed of a central part of gypsum and surrounded by a special adherent paper. This type of plates can be used in all dry construction applications.
• Use: walls, counter-walls and internal false ceilings.
• Dimensions: Width 120 cm. Length from 200 cm to 350 cm. Thickness from 9.5 mm to 18 mm.
2. Fireproof Red Plate: sandwich composed of a central part of gypsum, enhanced with mineral fibers and additives to increase the fire resistance of the material. These plates are classified as DF according to the UNI EN 520 standard.
• Use: walls, counter-walls and false ceilings where fire protection is required.
• Dimensions: Width 120 cm. Length from 200 cm to 300 cm. Thickness from 12.5 mm to 18 mm.
3. Green Hydro Slab: sandwich composed of a central part of gypsum, subjected to procedures that limit the damage due to humidity.
• Use: walls, counter-walls and false ceilings in damp rooms (bathrooms, kitchens, spa ...).
• Dimensions: Width 120 cm. Length from 200 cm to 300 cm. Thickness 12.5 cm.
4. Flexible White Plate: sandwich composed of a central part of gypsum, of reduced thickness, highly flexible, suitable for creating curved surfaces. Note: due to the reduced thickness, for the workings they are almost always used in a double layer, moistening the surface if a very narrow curvature is to be achieved.
• Use: walls, counter-walls and false ceilings where a curved surface is needed.
• Dimensions: Width 120 cm. Length from 250 cm to 300 cm. Thickness 6.5 cm.
5. Green Hydro / Fireproof slab: sandwich composed of a central part of high-density gypsum suitable for application in humid environments and with added mineral fibers to improve its resistance to fire.
• Use: walls, counter-walls and false ceilings in humid environments where fire protection is required.
• Dimensions: Width 120 cm. Length from 200 cm to 300 cm. Thickness from 12.5 mm to 15 mm.
6. EPS Insulating Sheet: Sheets coupled with expanded polystyrene (open cells) with a self-extinguishing density of 25 kg / m (U.N.I standard). In addition to being very light, this sheet allows excellent thermal insulation thanks to the presence of the applied insulating material. This allows the limitation of condensation phenomena and the subsequent birth of molds.
• Use: walls and counter-walls where it is necessary to thermally insulate the environment in question.
• Dimensions: Width 120 cm. Length from 200 cm to 300 cm. Thickness of plasterboard from 9.5 mm to 12.5 mm. Expanded polystyrene thickness to be applied from 20 mm to 80 mm.
7. Mineral Wool Insulating Plate: Sheets coupled on the back with a panel in glass wool or rock wool of various densities and thicknesses.
• Use: walls and counter-walls where it is necessary to thermally insulate the environment in question.
• Dimensions: Width 120 cm. Length from 200 cm to 300 cm. Thickness of plasterboard from 9.5 mm to 12.5 mm. Thickness mineral blades to be applied from 20 mm to 50 mm.
8. XPS Insulating Sheeting: Sheets coupled with extruded polystyrene insulation (closed cells) with a density of 35 kg / cubic meter. XPS is a material that has no harmful substances and therefore absolutely compatible with human health. The characteristics of the XPS are required when it is necessary to obtain important thermal performances.
• Use: walls and counter-walls where it is necessary to thermally insulate the environment in question with important performances.
• Dimensions: Width 120 cm. Length from 200 cm to 300 cm. Thickness of plasterboard from 9.5 mm to 12.5 mm. Extruded polystyrene thickness to be applied from 20 mm to 80 mm.